|
|
|---|
|
|
#1 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Hello everyone and welcome to the board, I would like to take a moment to present the M5 that will next week get a TWIN S/C kit, the car will work as a rolling showcase for the kit.
The car is a low milage facelifted 00' and is a "tru-beast" already with Kelleners sport cams, slightly reworked heads, K&N CAI, Kelleners exhaust, Kelleners ECU software, Kelleners Short-shift, Porsche GT3 brakes on 380mm discs front and 322 rear, ACS electronic adjustable suspension, Hartge Nova 20" wheels, it's dynoed to 456 hp / 558 Nm "as is" today. Progress of the project with pictures will be posted here on a weekly basis, I will start to with posting pictures of its current state. ![]() ![]() ![]() ![]() ![]() ![]() Last edited by BeastPower Scandinavia; 05-17-2005 at 12:43 AM. |
|
|
|
|
|
#2 (permalink) | |
|
2nd Lieutenant
![]() Join Date: Apr 2005
Location: Alexandria, VA
Posts: 691
|
Quote:
How much do these wheels weigh?
__________________
![]() 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim |
|
|
|
|
|
|
#3 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
I'am glad to hear you like it !
Weight of a 10x20 Hartge Nova 7 wheel is 15,5 kg / 34.1 lbs
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#4 (permalink) |
|
Private
![]() Join Date: May 2005
Location: Sweden
Posts: 1
|
Hi!
Re the Milage. Are you sure it's a low milage car? As I'm 99% sure I know the car from it's first owner(was it imported as new from Germany by it's first owner?) and I think it was closing in on 100000 km and has been Nürburgringed quite often even before it went to it's second owner two or three years ago. Thouroghly going through the engine before starting any modifications might be wise. Regards, |
|
|
|
|
|
#5 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
This is supposed to be a car sold new in Sweden, But thank you for your warning I will investigate it.
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#6 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
History is checked and verified as far as I can.
The car is a Swedish sold BMW by BMW and I've located all previous owners (3) - might of course still be f**cked by anyone of them. but documentation and a two different sources that I trust verifies previous owners as serious (or even extremely serious). so not much more to do, I will let BMW check out the LCM also.
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#8 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Thank you Gustav, got it confirmed from other sources stated the same, drove it 800 km/rs yesterday and I must say it is a truly great car, not as fast at the 540is (yet) better response though and a bit (or two) more sophisticated and quiet.
Also found an article from some old magazine on it that I will scan here - fun to have some history on the car. also got receipts from the Kelleners, and Schnitzer jobs & parts - thats always nice. so everything seems 100% We are still missing the Intercoolers for the S/C kit - so the S/C fitting is postponed to next weekend.
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#9 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
And they looked quite nice on the M5 also :-)
![]()
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... Last edited by BeastPower Scandinavia; 06-06-2005 at 09:46 AM. Reason: Borrowed the rims from the 540is project:-) |
|
|
|
|
|
#10 (permalink) | |
|
Administrator
![]() Join Date: Apr 2005
Location: USA & UK
Posts: 1,745
|
Quote:
Cheers, Daniel.
__________________
BeastPower Motorsports, Inc. Exclusive products for your BMW - www.beastpower.com - beastpower@beastpower.com . 1987 M3 (e30) - Diamond Black Magnecor Ignition Wires (with GSP Low-Cross Fire Routing Bracket), Turner Conforti 7800 RPM chip, Samco Silicone Cooling System Hose Kit (red), ABA Stainless Steel Coolant Hose Clamps, Koni Sport Shock Absorbers (adjustable), Hartge Front Strut Brace, Powerflex Control Arm Bushings (offset), Powerflex Front Sway Bar Bushings, BBS RC 17"x8" ET38 Wheels (and spare), Rogue Engineering 18mm Front and Rear Spacers (with bolts), OMP Front Drilled/Slotted Rotors, OMP Front Pads, BimmerWorld Evo Teflon/Stainless Steel Brake Lines, Ceramic Clutch, Upgraded Transmission Mounts, Evo 3 Leather Shift Boot, Evo 3 Suede Shift Knob, GPS Locator/Alarm and Immobilizer, Bimmian Xenesis High-Beam and Main-Beam Bulbs, Smoked Front Indicator Covers, Startec Smoked Tail-Lights, Bosch Smoked Head-Lights (elipsoid smilies), VAC S14 Oil Pan Baffle, H&R Sport Springs (lowering F1.00 R0.75), Rogue Engineering Rear Shock Mounts, Zimmerman Rear Brake Rotors, SPAL 16" Puller Fan, Evo 3 Lower Airbox, Rear Performance Friction "New Z-Rated" Carbon Metallic Brake Pads, Rogue Engineering Short-Shifter, Supersprint Muffler, Supersprint Resonator Center Section, SPAL 16" Low-Profile Electric Cooling Fan (puller). . The contents of this message-board (forum) thread/post and any advice, recommendations and/or interpretations provided are solely the opinion of the writer. The reader, customer, purchaser and/or user assume(s) all risks. BeastPower Motorsports, Inc. and the author accept no liability and no responsibility whatsoever for the information provided. . |
|
|
|
|
|
|
#11 (permalink) |
|
2nd Lieutenant
![]() Join Date: Apr 2005
Location: Alexandria, VA
Posts: 691
|
I'm so jealous! Looks good!
__________________
![]() 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim |
|
|
|
|
|
#13 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
We are now under boost :-)
ECU programming next few days.
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#15 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Some installation pictures; please note we have not started the "Cleanup phase" yet
What u see is 610 HP with twin Rotrex C-74's, Twin W/A Intercoolers all very descrete installed. Premier 402 meters and some slalom in Gävle/Sweden the coming saturday. Note the mix of hoses going back and forth, plus the general messy look. we can call this a "beta" version..... Anyway the POWER is AWESOME !!
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... Last edited by BeastPower Scandinavia; 06-13-2005 at 07:19 AM. |
|
|
|
|
|
#16 (permalink) |
|
Sergeant
![]() Join Date: Jun 2005
Location: Temple Hills, MD.
Posts: 132
|
why couldnt my M5 be the project car.....anyways the rims look great, are those 20X10's in the rear???? Do they rub any, the reason I ask is Im looking for 20X10's in the rear for my M5..... TSW Thruxton's....
|
|
|
|
|
|
#17 (permalink) |
|
Corporal
![]() Join Date: May 2005
Location: Rancho Santa Fe, Ca
Posts: 64
|
i love project cars....and i cant wait to see some vids when you are all done
!!!!!
__________________
FOR SALE: 2001 Anthracite/Black E39 M5 Dinan software Integrated radar detector in steering column AutoTechnik Black grille KW Variant 1 coilovers Millenium Ceramic Tint (18%) Supersprint X-pipe Kelleners Sport Edition Exhaust UUC EVO III SSK UUC DSSR UUC Transmission Mounts (black) AA CAI w/front air dam grill 19" BBS LM wheels Predator ICE angel eyes Euro Headlights |
|
|
|
|
|
#19 (permalink) | |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Quote:
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
|
#20 (permalink) | |
|
Administrator
![]() Join Date: Apr 2005
Location: USA & UK
Posts: 1,745
|
Quote:
Cheers, Daniel.
__________________
BeastPower Motorsports, Inc. Exclusive products for your BMW - www.beastpower.com - beastpower@beastpower.com . 1987 M3 (e30) - Diamond Black Magnecor Ignition Wires (with GSP Low-Cross Fire Routing Bracket), Turner Conforti 7800 RPM chip, Samco Silicone Cooling System Hose Kit (red), ABA Stainless Steel Coolant Hose Clamps, Koni Sport Shock Absorbers (adjustable), Hartge Front Strut Brace, Powerflex Control Arm Bushings (offset), Powerflex Front Sway Bar Bushings, BBS RC 17"x8" ET38 Wheels (and spare), Rogue Engineering 18mm Front and Rear Spacers (with bolts), OMP Front Drilled/Slotted Rotors, OMP Front Pads, BimmerWorld Evo Teflon/Stainless Steel Brake Lines, Ceramic Clutch, Upgraded Transmission Mounts, Evo 3 Leather Shift Boot, Evo 3 Suede Shift Knob, GPS Locator/Alarm and Immobilizer, Bimmian Xenesis High-Beam and Main-Beam Bulbs, Smoked Front Indicator Covers, Startec Smoked Tail-Lights, Bosch Smoked Head-Lights (elipsoid smilies), VAC S14 Oil Pan Baffle, H&R Sport Springs (lowering F1.00 R0.75), Rogue Engineering Rear Shock Mounts, Zimmerman Rear Brake Rotors, SPAL 16" Puller Fan, Evo 3 Lower Airbox, Rear Performance Friction "New Z-Rated" Carbon Metallic Brake Pads, Rogue Engineering Short-Shifter, Supersprint Muffler, Supersprint Resonator Center Section, SPAL 16" Low-Profile Electric Cooling Fan (puller). . The contents of this message-board (forum) thread/post and any advice, recommendations and/or interpretations provided are solely the opinion of the writer. The reader, customer, purchaser and/or user assume(s) all risks. BeastPower Motorsports, Inc. and the author accept no liability and no responsibility whatsoever for the information provided. . |
|
|
|
|
|
|
#21 (permalink) | |
|
2nd Lieutenant
![]() Join Date: Apr 2005
Location: Alexandria, VA
Posts: 691
|
Quote:
__________________
![]() 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim |
|
|
|
|
|
|
#22 (permalink) |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
A little video is coming up this week.
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
#24 (permalink) | |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Quote:
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
|
#26 (permalink) | |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Quote:
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
|
#27 (permalink) | |
|
2nd Lieutenant
![]() Join Date: Apr 2005
Location: Alexandria, VA
Posts: 691
|
Quote:
__________________
![]() 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim |
|
|
|
|
|
|
#28 (permalink) | |
|
Corporal
![]() Join Date: Apr 2005
Location: Knivsta, Sweden
Posts: 69
|
Quote:
__________________
Unpainted / Under construction - M5 GTR Project, Brembo GT LM brakes 380(8pot)/345mm discs, KW Type III suspension, K-Mac front and rear, Powerflex, Spec III+ Clutch/flywheel, Full FIA approved Rollcage..... |
|
|
|
|
|
|
#29 (permalink) | |
|
Administrator
![]() Join Date: Apr 2005
Location: USA & UK
Posts: 1,745
|
Quote:
__________________
BeastPower Motorsports, Inc. Exclusive products for your BMW - www.beastpower.com - beastpower@beastpower.com . 1987 M3 (e30) - Diamond Black Magnecor Ignition Wires (with GSP Low-Cross Fire Routing Bracket), Turner Conforti 7800 RPM chip, Samco Silicone Cooling System Hose Kit (red), ABA Stainless Steel Coolant Hose Clamps, Koni Sport Shock Absorbers (adjustable), Hartge Front Strut Brace, Powerflex Control Arm Bushings (offset), Powerflex Front Sway Bar Bushings, BBS RC 17"x8" ET38 Wheels (and spare), Rogue Engineering 18mm Front and Rear Spacers (with bolts), OMP Front Drilled/Slotted Rotors, OMP Front Pads, BimmerWorld Evo Teflon/Stainless Steel Brake Lines, Ceramic Clutch, Upgraded Transmission Mounts, Evo 3 Leather Shift Boot, Evo 3 Suede Shift Knob, GPS Locator/Alarm and Immobilizer, Bimmian Xenesis High-Beam and Main-Beam Bulbs, Smoked Front Indicator Covers, Startec Smoked Tail-Lights, Bosch Smoked Head-Lights (elipsoid smilies), VAC S14 Oil Pan Baffle, H&R Sport Springs (lowering F1.00 R0.75), Rogue Engineering Rear Shock Mounts, Zimmerman Rear Brake Rotors, SPAL 16" Puller Fan, Evo 3 Lower Airbox, Rear Performance Friction "New Z-Rated" Carbon Metallic Brake Pads, Rogue Engineering Short-Shifter, Supersprint Muffler, Supersprint Resonator Center Section, SPAL 16" Low-Profile Electric Cooling Fan (puller). . The contents of this message-board (forum) thread/post and any advice, recommendations and/or interpretations provided are solely the opinion of the writer. The reader, customer, purchaser and/or user assume(s) all risks. BeastPower Motorsports, Inc. and the author accept no liability and no responsibility whatsoever for the information provided. . |
|
|
|
|
![]() |
| Social Bookmarks - Click below to bookmark this discussion thread |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |