Britalman - 3-Series Development Cars Needed

BeastPower · 01-23-2007, 10:36 AM

Britalman needs the following cars (see below) to measure for future Britalman exhaust system development. They need the car for one day (morning until early evening) for a measuring session. The car would be picked up early morning and brought back late afternoon or early evening time. Nothing will be taken off the car during this measuring session. If they can continue to use the vehicle for further test fitting, they will provide a free exhaust system (installed) when the system is production ready.

2007 BMW 328i sedan
2007 BMW 328i coupe
2007 BMW 335i sedan

Location is Los Angeles area. Contact us if you are interested.

Cheers, Daniel.

bvarianlvr · 01-24-2007, 06:17 AM

I just saw your profile addition for the M3. You really picked up a nice example! My former BMW mechanic has 2, one of which has an E36 M3 engine shoehorned in. I'd rather have the one with the original 4 cylinder but its red. :(

BeastPower · 01-24-2007, 11:57 AM

Quote:

Originally Posted by bvarianlvr

I just saw your profile addition for the M3. You really picked up a nice example! My former BMW mechanic has 2, one of which has an E36 M3 engine shoehorned in. I'd rather have the one with the original 4 cylinder but its red. :(

Thanks! The M3 (e30) is a great car, and lots of fun as a project.

Cheers, Daniel.

bvarianlvr · 01-25-2007, 04:14 AM

Wouldn't Britalman be good to go by making E46 exhausts? I figure its a bit early for E90 exhausts, no?

BeastPower · 01-26-2007, 12:29 AM

Quote:

Originally Posted by bvarianlvr

Wouldn't Britalman be good to go by making E46 exhausts? I figure its a bit early for E90 exhausts, no?

I don't know what Britalman's product development plans are, but the e46 market is saturated, so pushing into the e90 market makes sense.

Cheers, Daniel.

01-23-2007, 10:36 AM	#1 (permalink)
BeastPower Administrator Join Date: Apr 2005 Location: USA & UK Posts: 1,745	Britalman - 3-Series Development Cars Needed Britalman needs the following cars (see below) to measure for future Britalman exhaust system development. They need the car for one day (morning until early evening) for a measuring session. The car would be picked up early morning and brought back late afternoon or early evening time. Nothing will be taken off the car during this measuring session. If they can continue to use the vehicle for further test fitting, they will provide a free exhaust system (installed) when the system is production ready. 2007 BMW 328i sedan 2007 BMW 328i coupe 2007 BMW 335i sedan Location is Los Angeles area. Contact us if you are interested. Cheers, Daniel. __________________ BeastPower Motorsports, Inc. Exclusive products for your BMW - www.beastpower.com - beastpower@beastpower.com . 1987 M3 (e30) - Diamond Black Magnecor Ignition Wires (with GSP Low-Cross Fire Routing Bracket), Turner Conforti 7800 RPM chip, Samco Silicone Cooling System Hose Kit (red), ABA Stainless Steel Coolant Hose Clamps, Koni Sport Shock Absorbers (adjustable), Hartge Front Strut Brace, Powerflex Control Arm Bushings (offset), Powerflex Front Sway Bar Bushings, BBS RC 17"x8" ET38 Wheels (and spare), Rogue Engineering 18mm Front and Rear Spacers (with bolts), OMP Front Drilled/Slotted Rotors, OMP Front Pads, BimmerWorld Evo Teflon/Stainless Steel Brake Lines, Ceramic Clutch, Upgraded Transmission Mounts, Evo 3 Leather Shift Boot, Evo 3 Suede Shift Knob, GPS Locator/Alarm and Immobilizer, Bimmian Xenesis High-Beam and Main-Beam Bulbs, Smoked Front Indicator Covers, Startec Smoked Tail-Lights, Bosch Smoked Head-Lights (elipsoid smilies), VAC S14 Oil Pan Baffle, H&R Sport Springs (lowering F1.00 R0.75), Rogue Engineering Rear Shock Mounts, Zimmerman Rear Brake Rotors, SPAL 16" Puller Fan, Evo 3 Lower Airbox, Rear Performance Friction "New Z-Rated" Carbon Metallic Brake Pads, Rogue Engineering Short-Shifter, Supersprint Muffler, Supersprint Resonator Center Section, SPAL 16" Low-Profile Electric Cooling Fan (puller). . The contents of this message-board (forum) thread/post and any advice, recommendations and/or interpretations provided are solely the opinion of the writer. The reader, customer, purchaser and/or user assume(s) all risks. BeastPower Motorsports, Inc. and the author accept no liability and no responsibility whatsoever for the information provided. . Last edited by BeastPower; 01-23-2007 at 10:37 AM.

01-24-2007, 06:17 AM	#2 (permalink)
bvarianlvr 2nd Lieutenant Join Date: Apr 2005 Location: Alexandria, VA Posts: 691	Re: Britalman - 3-Series Development Cars Needed I just saw your profile addition for the M3. You really picked up a nice example! My former BMW mechanic has 2, one of which has an E36 M3 engine shoehorned in. I'd rather have the one with the original 4 cylinder but its red. :( __________________ 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim

01-25-2007, 04:14 AM	#4 (permalink)
bvarianlvr 2nd Lieutenant Join Date: Apr 2005 Location: Alexandria, VA Posts: 691	Re: Britalman - 3-Series Development Cars Needed Wouldn't Britalman be good to go by making E46 exhausts? I figure its a bit early for E90 exhausts, no? __________________ 2004 Honda Accord EX-L V6 - Graphite Pearl Future: D2 coilovers, H&R front & rear sway bar, 18x8 Team Dynamics Pro Race 1.2, 225/40/18, Accord DX black window trim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)